I built three of Thomas Henry’s XR VCO’s a few months ago and its about time I put up some samples for folks to hear. For the first sample “3 XR-VCO warm” I have the three VCO’s going through a CEM3320 filter with one of those VCO’s going through a CEM3320 phase shifter. I am modulating by hand the cutoff and resonance of the phase shifter. On the filter I have an LFO modulating the cutoff. You can hear the VC Skew on one of the VCO’s.

For the second sample “3 XR-VCO step sequence” I have the same setup as above except I am not modulating the phase shifter. Instead I mix in the third VCO at around 20 seconds. I am using a Fat Controler as the step sequencer.

• 3 XR-VCO warm

• 3 XR-VCO step sequence

Here is an example of what the CGS gated comparator can do. The gated comparator is triggering a CGS dual drum, CGS dual chime, CGS Cynare, and a VCO.

• gc beats

I forgot about this song. I made this a while ago. I used my modular on this a lot. Lots of dark sci fi FM noises with a very dreamy meloncoly pad from the Korg DW8000. Smokey hazy.

• sfumato

Here are two songs I made using the Prophet 600 and a CEM3320 phase shifter.

• Phase shifter
• prophet 600

Ok. I didn’t really like the most recent design that I had up here, so I completely changed it. I hope you like this better. I know I do. Check out the rest of my site by going to the pages link at the top right.

thanks for visting